Know the Faulty Signs of Brake Problems & Drive Safe!!

Posted in: Car Insurance, Driving Tips, Fleet Driver News, News.

Know the Faulty Signs of Brake Problems & Drive Safe!!

Brakes are the most significant components of the vehicle. It controls the speed and velocity of the vehicle. A problem with the braking system may lead to improper functioning of a vehicle. If you notify any symptoms of the bad braking system, make sure to get a professional checkup of your vehicle. This will ensure safe driving and cut off on damage expenses.

The major brake parts, which may face a serious issue, can be brake lines, brake pads, rotors and master cylinders. It is always suggested to go for a periodic inspection of your vehicle for uninterrupted performance.

Brake Parts
Brake Parts

Brake Parts

Six Signals That Indicate You Need New Brakes:

Here are some of the common warning signals that indicate replacement of brake parts. There are standard procedures for testing and replacing brake system.

The above information will help you in finding out the braking problems of your vehicle. Not only this, it will also assist you in recognizing the exact issue and solutions for solving it without much hassle. You can approach a technician or professional for a periodic inspection (once or twice yearly). As a result, your vehicle will run sound and safe.

1. Brake Warning Lights: .

When red or yellow brake indicator flashes on the vehicle’s dashboard, it means that you are having low brake fluid or need a proper vehicle inspection. For adding fluid, you may go through the master cylinder section for details and follow the instructions for a brake inspection. The light can also flash because of the engaged parking brake, make sure it is completely released

2. Squealing, Squeaking or Grinding Noises: .

If you hear unusual noises from your vehicle, then it’s a sign to replace or adjust the brake system. Squealing is a loud noise, which occurs when the brake pads are worn out. The pads are made up of metal and start making noise when they reach near rotors. It is better to change the pads before it affects the rotors. Grinding indicates serious issues with the vehicle, mostly worn brake pads, lack of lubrication, scraping of brake shoe, or just pebble or rock wedged in the caliper.

3. Wobbling, Vibration or Scraping when applying Brakes: .

If steering wheel of your vehicle is shaking or vibrations can be felt in the entire car when the brakes are applied then your rotors are damaged. To head of these issues, plan a check of brakes periodically.
The brake rotor is one reason, which causes wobbling. Another reason is the improper releasing of the caliper, which causes rough braking. Other reasons may be sticky pistons and incorrect wheel lug nut installation.

 

Brake-Parts
Brake-Parts

Brake Parts

4. Fluid Leakage:.

A leakage of fluid can be assumed when the brake pedal becomes soft. Master cylinder is a reservoir of fluid and generates power for your brakes. When brakes are applied, the fluid flows through a pipeline, producing hydraulic pressure. If there is leakage, then the amount of power needed by the brake pads may not be produced.

5. Car Pulling to One Side: .

When your car pulls to one side as soon as the brakes are applied, there is a fluid leakage, caliper problem, unstable brakes or warped brakes. In this case, immediate replacement is required for proper functioning of the car.

6. Brake Pedal Problem: .

If the vehicle pedal becomes spongy or soft when pressed, this means that air or moisture has entered in the braking system. It may also be a problem with master cylinder or brake fluid shortage. Therefore, it is must to check your brake parts lines and master cylinder from time to time.


Tags: , , , ,


We’re Somewhere Near You

Find a Blue School Of Motoring instructor somewhere near you and become one step closer to learning to drive.

Ascot | Bath | Bracknell | Crowthorne | Frome | Reading | Slough | Taunton | Trowbridge | WindsorWokingham | Yeovil